Connect to a device via Device Manager
4.4
Change network settings with Device Manager
With Device Manager, you can directly change the network settings of the HSD820v2H3-E.
To assign a static IP address
1
Go to the list of detected devices, and then right-click the entry for the HSD820v2H3-E.
2
Click Change Network Settings.
3
In Change Network Settings, click Static IP.
4
Provide the camera with an appropriate IP address, netmask, and gateway address for
the desired network configuration, and then click OK.
5
In the pop-up window indicating that you have successfully changed the settings, click
OK.
6
Wait one minute, and then rescan the network.
7
To access the webpages of the HSD820v2H3-E, double-click its entry in the list of found
devices.
Access the webpages
17
