22
Full Commission Mode
To fully commission the unit for optimum effi
ciency, each step below MUST be
followed in sequence:
Power up the Titon CME1 Q Plus.
Gain access to the control board located under the COVER.
Move the jumper from the STORED
position to the ON position.
Ensure the controller is in Continu-
ous mode, switch 1 OFF.
Select required setting for continu-
ous speed using switches 2 to 4 on
the Speed Selection Switch.
1.
2.
3.
4.
5.
Full Commissioning
Continuous speed setting
Speed Selection
Switches
Potentiometer
Boost Control
Connections
on dip
1 2 3 4
Jumper
Control Board
Stored
ON
Jumper Positions
CME1_Q_Plus_Product_Manual.indd 22
CME1_Q_Plus_Product_Manual.indd 22
24/09/2009 15:15:33
24/09/2009 15:15:33
