Titan UMAP 2110, Hardware Installation And User'S Manual

Page: 21 / 62

1
—
Installation of the UMAP 2110
1.2.7 Ethernet Port (MGMT)
The UMAP 2110 provides one RJ45 Jack (MGMT) on the front panel for Ethernet interface
connection. The detailed pin assignment is shown in the following figure and table.
1 2 3 6 Other pins
TX + TX - RX + RX -
Bob Smith
Termination
Figure 1-9 Ethernet Port RJ-45 pin assignment
To connect the Ethernet interface to PC, the Ethernet crossover cable is required. The detailed pin
assignment is shown below.
Brown 1
Green/White 8
Green 7
Orange/White 6
Blue 5
Blue/White 4
Orange 3
Brown/White 2
8 Green/White
1 Orange
2 Orange/White
3 Brown
4 Blue/White
5 Blue
6 Brown/White
7 Green
Name Pin Pin Name
Tx+ 1 3 Rx+
Tx- 2 6 Rx-
Rx+ 3 1 Tx+
Rx- 6 2 Tx-
13 / 54