33
TTB597TCB
by TITAN
Trouble shooting
In
more
detail…
GB
IE
WARNING!
Only perform the steps described within these
instructions! All further inspection, maintenance and repair work
must be performed by an authorised service centre or a similarly
qualified specialist if you cannot solve the problem yourself!
Suspected malfunctions are often due to causes that the users can fix themselves.
Therefore check the product using this section.
In most cases the problem can be solved quickly.
Trouble shooting
Problem
Possible cause
Solution
1. Motor not running 1. No mains voltage.
1. Check cable, plug,
socket and fuse.
2. Motor runs,
cutting disc
remains still
when subject to
load.
2. Flange nut loose.
2. Check the flange is
seated correctly and
tighten if necessary.
3. Cutting disc runs
irregularly/vibrates
3.1 Cutting disc warped.
3.2 Cutting disc fitted
incorrectly.
3.1 Replacing the cutting
disc.
3.2 Fit the cutting disc
correctly.
3. Cutting disc is
discoloured.
4.1 Insufficient cooling
water.
4.2 Lateral friction
caused by cut runout.
4.1 Fill the product with
water.
4.2 Guide workpiece
through cutting disc
more slowly.
