TA 250 / TA 450
(0001)
55
/
112
9.2. Charger
To operate the charger put the socket-averted side
of the power cable in the charger and the connector
in a socket which is fed with power of 110 V / 230 V.
Explanation of charging stages:
Visual signals
Green LED is
bright
Storage battery fully charged
charge 100 %
Green LED
flashes
Storage battery is being charged
charge 80 to 99 %
Red LED is bright
Storage battery is being charged
charge 0 to 80 %
Red LED flashes
Storage battery overheated
or
voltage below 10.4 V.
(troubleshooting required see item
11)
Sound signals
2 short beeps
Storage battery OK
charging cycle starts
1 long beep
Storage battery full loaded
2 short beeps
every one minute
after full charge
reached
Storage battery full loaded but still
housed into charger
fast intermittent
continuous beeps
Storage battery has trouble
–
charge didn’t allow
After the end of the charging operation remove the Li-Po storage battery from the charger
and also pull the mains connector of the charger out of the socket. This helps avoid
unnecessary expenses for power.
H TA 250 / 450 EU 38/15
Summary of Contents for TA 250
