TA 250 / TA 450
(0001)
46
/
112
7.2. Semi-automatic strapping
The strapping starts by
pushing and holding
the push-button 1
.
When
the
adjusted strap tension is reached,
friction welding starts
and
the strap is cut
automatically.
The seal is formed!
The tension operation will be stopped by
releasing the push-button 1 during the tension
operation.
Pull the lever 3 toward the grip
and hold it.
Now
the
strap
is
released
.
Turn the strapping
tool to the right side away from the strapping
while holding the lever.
7.3. Automatic strapping
The strapping starts by
pressing the push-
button 1 twice within short time
.
Tensioning,
friction welding and also strap cutting is
achieved automatically.
The strapping operation can be stopped by
pushing the push-button 1 or 2. Attention: the
tension operation will be stopped automatically
after 15 seconds when the max. strap tension
isn’t reached.
The seal is formed!
Pull the lever 3 toward the grip
and hold it. Now
the
strap
is
released
.
Turn the strapping tool to
the right side away from the strapping
while
holding the lever.
2 x
H TA 250 / 450 EU 09/15
Summary of Contents for TA 250
