TA 250 / TA 450
(0001)
43
/
112
6. Commissioning
Never operate the TA 250 / TA 450 without plastic strap
. Transport wheel, welding device and
the cutter could get damaged.
The operation of the TA 250 / TA 450 requires sufficiently charged Li-Po storage battery.
When the tool was delivered you received a partially charged Li-Po storage battery.
Please charge
the Li-Po storage battery before first use.
(see section 7.7)
.
Remove the spacer before first use.
To start operations
of the
TA 250 / TA 450
plug the
Li-Po storage battery
into the slot provided
till the
stop is reached
.
To enable
the tool please
press push-button 1 for a
moment.
The LED signal lamp flashes. The
TA 250 / TA 450
is
ready for operation
.
LED signal lamp
Flashes
Stand
– by mode
is bright
Tool in operation
H TA 250 / 450 EU 09/15
Push-button 1
Summary of Contents for TA 250
