background image

 

 

Avoid wearing loose clothing or jewelry, which can catch on the machine’s moving parts. 

 

We recommend wearing gloves while using this machine. Be sure your gloves fit properly and do not 
have loose cuffs or drawstrings. 

 

Wear shoes with non-slip treads when using your 3PT Trimmer. Safety shoes are recommended. Do 
not use the machine while barefoot or wearing sandals with exposed toes or heels. 

 

Wear long pants while operating the 3PT Trimmer. 

 

Use ear protectors or ear plugs rated for at least 20 dba to protect your hearing. 

 

Keep bystanders at least 100 feet away from your work area at all times. The tips of the cutting cords 
on the 3PT Trimmer can throw sticks, small stones, gravel, and bits of debris over long distances at 
great  velocity.  Do  not  travel  over  loose  materials  such  as  gravel  or  mulch  with  the  trimmer  head 
spinning. Doing so could cause injury or property damage from thrown objects. Disengage the PTO 
shaft to stop the spinning cords and shut off the Tractor engine when another person or pet approaches. 

 

Never tamper with safety devices. Check their proper operation regularly. 

 

Never operate the machine when under the influence of alcohol, drugs, or medication. 
 

 

 

Operating the Trimmer/mower Safety 

 

         

WARNING 

This is a high-powered machine, with moving parts operating with high energy at high speeds. You must 
operate the machine safely. Unsafe operation can create a number of hazards for you, as well as anyone 
else in the nearby area. Always take the following precautions when using this machine: 

 

Do not have the Trimmer engaged or resting on the ground when backing up. The machine is designed 
to trim and roll on the Wheel in the forward direction only. Trimming or rolling on the Wheel in the 
reverse direction could damage the machine and is not covered by the Warranty. 

 

Know how to stop the Trimmer quickly by disengaging the PTO Shaft and shutting down the tractor. 

 

Never  allow  people  who  are  unfamiliar  with  these  instructions  to  use  the  3PT Trimmer. Allow  only 
responsible individuals who are familiar with these rules of safe operation to use your machine. 

 

Do not exceed 2 mph when trimming to allow proper cutting and discharge of material. 

 

Do not exceed 7 mph when transporting to prevent damage to the machine. 

 

Operating your 3point trimmer with the head misaligned with the ground can result in poor cut quality, 
pivoting problems, scalping during cutting, wear on your equipment, and damage to the cutting cord. 

 

Never place your hands, feet, or any part of your body on or under the mower deck in the path of the 
spinning cords, belt, pulleys, or near the discharge opening while the tractor is running. Keep area of 
discharge clear of people, animals, buildings, glass, or anything else that will obstruct clear discharge, 
cause injury, or damage. 

 

Your 3PT Trimmer is a powerful tool, not a plaything. Exercise extreme caution at all times. The design 
of your machine is for trimming and mowing grass, weeds, and other growth as specified in this manual. 
Do not use it for any other purpose. 

 

Whenever  you  leave  the  operating  position  to  make  adjustments,  change  cords  or  if  you  have  to 
remove grass or debris from the underside of the deck, always disengage PTO, shut down the Tractor 
Engine, remove the key, wait for all moving parts to come to a complete stop, disconnect the PTO shaft 

Summary of Contents for 191441





















Reviews: