TP 500 II
37
/
70
9.2. Replacement of the feed wheel
Remove the pressure spring
(Pos. 75) and disconnect the
hoses (Pos. 88) from the
tension motor (Pos. 504).
Remove the 6 fastening
screws (Pos. 87) from the
bottom plate (Pos. 77),
afterwards release the screw
(Pos. 47) which clamps the
shaft (Pos. 46).
Remove the hexagon nut
(Pos. 48), and pull out the
shaft (Pos. 46). Pay attention
that the shim (Pos. 45), it can
be lost.
Remove the clamping nut
(Pos. 40) and protection
cover (Pos. 503) to get free
the feed wheel (Pos. 38).
Replace the feed wheel (Pos. 38) and reassemble it
in reverse order.
H TP 500 II EU 04/12
Summary of Contents for 0002
Page 22: ...TP 500 II 22 70 11 Konformit tserkl rung H TP 500 II EU 44 11...
Page 42: ...TP 500 II 42 70 11 Declaration of conformity of the machine H TP 500 II EU 44 11...
Page 62: ...TP 500 II 62 70 11 D claration CE de conformit des machines H TP 500 II EU 44 11...
Page 64: ...TP 500 II 64 70 12 Explosionszeichnungen Exploded drawings Vue clat e H TP 500 II EU 50 13...
