TP 500 II
30
/
70
7. Operating
Never operate the TP 500 without plastic strap
; feed wheel as well as welding and
cutting device could get damaged.
Route the TITAN plastic strap from the top around
the packing item.
Only use plastic strap which is free of grease, oil
etc.
When
inserting the strap
pull the end of strap
through until it is in the middle of the packing item
under the upper strap and protrudes by one length
of hand.
Use your left hand to hold both straps exactly lying
above one another.
Pull handle to the tension motor
by means of
your right hand and hold it.
Pull both straps to the
stop
along the side of the housing wall
into the
tool
. Hereby, the lower strap must protrude a little
out of the tool.
Thereafter release the handle.
For
tensioning the strap press push-button 1
and
keep it pressed, until
the
strap tension
desired is
achieved
.
Thereafter release push-button 1.
H TP 500 II EU 04/12
Summary of Contents for 0002
Page 22: ...TP 500 II 22 70 11 Konformit tserkl rung H TP 500 II EU 44 11...
Page 42: ...TP 500 II 42 70 11 Declaration of conformity of the machine H TP 500 II EU 44 11...
Page 62: ...TP 500 II 62 70 11 D claration CE de conformit des machines H TP 500 II EU 44 11...
Page 64: ...TP 500 II 64 70 12 Explosionszeichnungen Exploded drawings Vue clat e H TP 500 II EU 50 13...
