17
8.2.3 OPERATION AND WEAR CHECKS
8.2.4 LIFT STABILITY
8.3 CLEANING
1�
Examine lift for structural cracks, bends, or other signs of damage prior to each use. Do
not use this product if worn or damaged.
2�
Check that the safety locking mechanism is functioning correctly.
3�
Check that the safety lock is audibly and visibly operating correctly.
4�
Check the floor for stress cracks near the anchor bolts.
1�
Every six months check the nuts of all bolts for correct installation torque.
2�
Retighten them as required. NOTE: DO NOT USE AN IMPACT WRENCH.
DANGER: DO NOT USE HIGH PRESSURE / STEAM JET CLEANERS OR
CAUSTIC CLEANING AGENTS.
1�
Periodically wash off aggressive substances and treat the lift with oil or wax spray.
2�
Repair the damage to the paintwork immediately to prevent corrosion.
