5
1.1 Key Features
The NCOM-113-M has the following features:
•
Adds a virtual serial COM port via network connection
•
NCOM-113-M fully supports the “COM Port Control” protocol known as
RFC2217
•
Supports network protocols such as TCP and UDP client/server
•
Serial port operation mode can be easily changed via our Windows utility
software or the web console interface
•
Firmware upgradable for future firmware revisions
•
Supports virtual serial port driver for Windows OS (Windows XP up to
Windows 10)
•
Supports pair connection mode for connecting two serial device servers
over a network without a PC
•
Easy-to-use Windows utility software for easy configuration and installation
•
10/100Mbps Ethernet with auto-detection
•
Configuration via web console interface or utility software
•
Windows utility software automatically finds NCOM devices on the network
•
Supports “reset” button for system reset and restoring to default settings
•
Data rates: 300bps to 921.6Kbps
•
Auto transmit buffer control for 2-wire RS-485 half-duplex operation
(NCOM-113-M and NCOM-112-M only)
•
Termination resistors installed on-board (NCOM-113-M and NCOM-112-M
only)
•
Supported RS-232 signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS (NCOM-
113-M and NCOM-111-M only)
•
Supported RS-422, RS-485 4-wire signals: TxD-, TxD+, RxD+, RxD- (NCOM-
113-M and NCOM-112-M only)
•
Supported RS-485 2-wire signals: data-, data+ (NCOM-113-M and NCOM-
112-M only)
•
LEDs indicating Ethernet port’s link and speed statuses
•
LEDs indicating serial port’s TxD and RxD statuses
•
LEDs indicating serial port’s operation mode
•
Virtual serial port drivers for Windows 10, 8.1, 8, 7, Vista, 2003, XP
•
Built-in 15kV ESD protection for all serial signals
