32
6.2 System Settings
The “SYSTEM SETTINGS” for NCOM-113-M includes “IP Address Selection”, “General
Configuration Settings” and “Restore Factory Defaults”.
Click “Address Type”, located under “IP Address Selection”, to select IP address type
(DHCP/AutoIP or Static IP) for NCOM-113-M. When you select “Static IP”, you need
to enter the static IP address (such as 192.168.254.254) and Subnet Mask (such as
255.255.255.0) then click “Update Settings” to set your device to static IP address.
Note: The NCOM-113-M’s default IP address is 192.168.254.254
If you are working in a DHCP network, you need to select “DHCP/AutoIP” and click
“Update Settings” to assign IP address for the NCOM-113-M automatically.
