25
5.5 TCP Raw Server Mode
In TCP Raw Server Mode, NCOM-113-M is configured with a unique IP & Port
combination on a TCP/IP network. It waits passively to be contacted by a host
computer. After a host computer establishes a transparent connection, it then
proceeds with data transmission.
In the figure, the data transmission proceeds as follows:
1.
The host computer requests a connection from NCOM-113-M configured for
TCP Raw Server Mode.
2.
Once the connection is established, data can be transmitted in both
directions – from the host computer to NCOM-113-M and from NCOM-113-
M to the host computer.
Under the “HOME” page of NCOM-113-M’s firmware, select “NETWORK SETTINGS”
to find the “Port 1 Mode Settings” window. Under “Mode”, select “TCP Raw - Server”
and check the “Make these the default settings” box and click “Apply Changes” to set
your NCOM-113-M into TCP Raw - Server Mode.
Host
Computer
Serial Device
TCP Raw Server Mode
NCOM-113-M
Serial cable
TCP/IP
Ethernet
○
1
○
2
