30
3.2 Safety Measures
3.2.1 During maintenance of the turnstile the relevant safety measures according to p.
2.1 to be observed.
IT IS FORBIDDEN:
TO
USE
DEFECTIVE
APPLIANCES,
TOOLS,
FUSES,
INSTRUMENTATION THE SERVISE LIFE OF WHICH EXPIRED.
3.2.2 When instrumentations are prepared for operation it is necessary to strictly comply
with the safety requirements specified in instrumentation instruction manuals.
3.3 Maintenance procedure
3.3.1 The turnstile maintenance includes preventive measures which are taken according to
the established frequency to maintain the turnstile in operational condition, decreasing of
component wearing and prevention of faults and malfunctions.
3.3.2 Daily and periodic maintenance of the turnstile are recommended.
Normally the daily maintenance is carried out before the beginning of operation or during
operational timeout and includes visual inspection of the turnstile's housing and, if required,
troubleshooting of mechanical damages, surface corrosion and contamination.
IT IS FORBIDDEN:
TO USE ABRASIVE AND CHEMICALLY ACTIVE SUBSTANCES DURING
CLEANING OF CONTAMINATED EXTERNAL SURFACES OF THE
TURNSTILE.
The recommended stainless steel detergents are given in Table 10.
Table 10
Detergent description
Manufacturer
Country of origin
Stainless steel cleaning spray Polich
3М
Group of European
companies
Cleaning fluid WellDone
Well Done
Hungary
Stailess steel products and other
metalscleaner XANTO STEEL 3in1
XANTO
United Kingdom
Foam Dr.BECKMANN
Dr.Beckmann
Germany
Cleaning solution Reinex
Edelstahlreiniger
Reinex
Germany
Stainless steel cleaner
Onish
United Kingdom
3.3.3 Visual inspection of the turnstile body, control mechanism and other components for
absence of corrosion, warps and other mechanical defects and pollutions;
visual inspection of connecting, network and earthing cables condition;
verification of the turnstile performance during manual control in the modes
specified in Table 9 or as part of ACS when pendants, identification cards are used;
verification of reliability of the turnstile screw joints and earthing connections - to
be tightened, if applicable;
