5
AutoV (LoZ) mode
AutoV automatically selects measurement function of DCV or ACV, based on their input
levels via the test leads. The input also provides a low ramp-up impedance (LoZ) to drain
ghost voltages*.
●With no input, the meter displays “- - - -” when it is ready.
●When a signal above the voltage threshold of 1V DC or AC up to the rated 1000V is
present, the meter displays the voltage value in appropriate DC or AC, whichever larger in
peak magnitude.
Note:
*Ghost-voltage Buster: Ghost-voltages are unwanted stray signals coupled from adjacent
hard signals, which confuse common multimeter voltage measurements. The AutoV mode
provides low (ramp-up) input impedance (approx. 2.1kΩ at low voltage) to drain ghost
voltages leaving mainly hard signal values on meter readings. It is an invaluable feature for
precise indication of hard signals, such as distinguishing between hot and open wires (to
ground) in electrical installation applications.
*Only HOLD, EF & Backlight push-button features are available in AutoV mode.
Summary of Contents for E217
Page 1: ...USER S MANUAL TIS E217...
Page 9: ...8...
