34
Programming
Remark:
You can erase a location within the programming process by pressing the redial key.
Internal distress radio call
Memory location 0 triggers off an internal distress radio call, i.e. the telephone rings with a
special ringing melody. The internal distress radio call is useful, e. g. if a nurse is present in
the house but not in the same room as the person seeking help.
For re-setting the internal distress radio call, please press the P and # keys in that order.
Test the coverage of the pendant
We recommend to test the coverage of the pendant. This is due to the fact that - depen-
ding on the type of building - the coverage may vary. For this purpose, you can program
the internal distress radio call as an example. If you have reliable information on the exact
coverage, you can avoid malfunctions. The maximum coverage in buildings is about 30
meters, outdoors it is about 250 meters.
Dialling restrictions
At your telephone, you can set three different types of dialling restrictions:
a) Direct call: The dialling process for a stored telephone number can be initiated by
pressing any key (except for the loudspeaker and the SOS key). The prerequisite to use
the direct call function is the programming of a direct call telephone number (with a
maximum of 20 digits).
b) Restricted numbers: The dialling procedure is restricted for individual telephone num-
bers (e. g. a specific prefix number). You have to enter restricted numbers to use this
function.
c) Full restriction: It is not possible to dial telephone numbers and to establish calls (except
for the numbers of police / fire service and the programmed SOS numbers as far as the
emergency call function or distress radio call function is active).
Store direct call numbers (baby call)
#
Press the P key and afterwards, press the # key (longer than 1 sec.).
Enter 4-digit-PIN.
