Operation
XD 7500
112
ba77191e01 - 71310060
04/2018
4.11.5
Saving measurement datasets automatically
For the measurement modes
Concentration
,
Absorbance / % Transmission
and
Special / Multi wavelengths
you can document each measurement value
automatically (
AutoStore
). The
AutoStore
function is active in the default con-
dition.
All automatically stored measurement datasets are given the ID "AutoStore".
The "AutoStore" ID is overwritten if the same measured value is manually
stored afterwards (
<STORE>
).
This ensures that every measurement dataset is stored in the data memory
only once.
Activating or deacti-
vating the
AutoStore
function
Activate or deactivate the
AutoStore
function as follows:
1
If necessary, set the filter criteria
with
[Setup]
.
2
Open the save dialog with
<STORE>
.
The photometer automatically pro-
poses the location
Internal DataB
folder
and a file name.
3
If necessary, change the location
with
[Location]
(
USB memory
).
4
If necessary, change the pro-
posed file name.
5
Save the measurement data with
<START·ENTER>
.
The data are stored.
If the photometer (
Internal DataB
folder
) is selected as the location,
the data can then be copied to a
USB memory device (see Section
4.12.1).
Save (Internal DataB folder)
16.01.17 9:52
Location
MData_1.csv
