Tineco PURE ONE S15 Series, Instruction Manual

Page: 24 / 112

EN
22
Battery Installation
• Press the battery release button, and remove
the battery.
Fig.C-6
• To install, slide the battery into the slot at the
base of the main body. The battery will click
into position when correctly fitted.
Fig.C-7
Charging Dock Installation
• Lift up the charging post to the upright
position.
Fig.C-8
• Press hard to fix the charging post firmly on the
dock.
Fig.C-9
• For easy storage, pull up the charging post and
then press down.
Fig.C-10
OPERATION
Preparing for Use
Note:
• Before the first use, please charge the
appliance (see “Charging the Battery”) for
3-4 hours in an area where the ambient
temperature is between 39.2°F (4°C) and 104°F
(40°C).
• Select an accessory and attach it to the
appliance before use (see “Accessories”).
1.Press the button to activate the suction.
Press it again to turn off the appliance.
Fig.D-1
2.The appliance will start in AUTO mode by
default. Press the
AUTO
MAX
button to switch between
AUTO and MAX mode.
Fig.D-2
3.Place the appliance and attachments on the
charging dock for convenient storage after use.
Fig.D-3
Cleaning Mode Selection
AUTO Mode
• In AUTO mode, the power indicator and
the color of dust monitoring loop change
according to the amount of dust detected.
• A red dust monitoring loop indicates more dust
is detected whereas a blue loop indicates less
is detected. This mode automatically provides
the best cleaning solution.
Fig.D-4
MAX Mode
• In AUTO mode, press the
AUTO
MAX
button to enter
MAX mode.
• In MAX mode, the iLoop only displays the dirty
amount, and the suction power keeps at the
maximum.
Fig.D-5
Note:
Keep sharp objects away from the digital display
screen to avoid scratches and scrapes.
App
All the functions can be performed using the
Tineco app. Download the Tineco app from the
App Store, Google Play and Tineco Official Site.
www.tineco.com
App
Downloads
Support
App Downloads
Tineco
Download on the
App Store
GET IT ON
Google Play
Turn On/Off WiFi
• Turn on WiFi: Long press the
AUTO
MAX
button for
3 seconds and connect to network.