background image

CAUTION: 

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO 

NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS 
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING: 

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, 

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

The lightning flash with arrowhead in an equilateral triangle is 
intended to alert the user of the presence of uninsulated 
“dangerous voltage” within the product’s enclosure that may 
be of sufficient magnitude to constitute a risk of electric shock. 

The exclamation point within an equilateral triangle is intended 
to alert the user of the presence of important operating and 
maintenance (servicing) instructions in the literature 
accompanying the appliance. 

The symbols above are located at the bottom of the cabinet.

CAUTION:  

To prevent electric shock, do not use this (polarized) 

plug with an extension cord receptacle, or other outlets unless the 
blades can be fully inserted to prevent blade exposure.

ATTENTION: 

Pour prévenir les chocs électriques ne pas utiliser 

cette fiche polarisée avec un prolongateur. Une prise de courant, 
ou une autre sortie de courant sauf si les lames peuvent étre 
insérées à fond sans en laisser aucune partie à decouvert.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

A Consumer Guide to Product Safety

IMPORTANT SAFETY INSTRUCTIONS

When used in the directed manner, this unit has been designed and manufactured to 
ensure your personal safety. However, improper use can result in potential electrical 
shock or fire hazards. Please read all safety and operating instructions carefully before 
installation and use, and keep these instructions handy for future reference. Take special 
note of all warnings listed in these instructions and printed on the product. 
1. 

 Water and Moisture

 —

 The unit should be kept dry and away from water or other 

liquids. If liquid is spilled on the unit, or if the unit should fall or be accidentally placed 
in or on a wet or damp area, immediately unplug the unit.

2. 

 Ventilation

 

 The unit should be set up in an area and position that does not 

interfere with its proper ventilation. Check to see where the ventilation opening is on 
the product. Do not set up the unit on a bed, sofa, rug, or similar surface that may 
block the opening. Do not keep the unit in a tight-fitting installation, such as a 
bookcase or cabinet, which impedes the flow of air through the ventilation openings.

3. 

 Heat

 

 The unit should be situated away from heat sources such as radiators, space 

heaters, stoves, or other appliances (including amplifiers) that produce or emit heat.

4. 

 Power Sources

 — 

The unit should be connected to a power supply only of the type 

described in the operating instructions, or as marked on the appliance.

5.  

Grounding or Polarization

 

 This unit is equipped with a two-pronged, polarized 

alternating-current line plug (a plug having one blade wider than the other). This plug 
only fits into your power outlet in one direction. This is a safety feature. If you are 
having difficulty inserting the plug fully into your outlet, try reversing the plug blades; 
do not force the plug into the outlet. If you are still having difficulty, contact your 
electrician to replace your obsolete outlet.

6.  

Power-Supply Cord Protection

 

 Power-supply cords should be routed so that 

they are not likely to be walked on or pinched by items placed upon or against them, 
paying particular attention to areas at the outlet and where they exit from the unit.

7.  

Overloading

 — 

Do not overload wall outlets, extension cords, or integral 

convenience receptacles as this can result in a risk of fire or electric shock.

8.  

Cleaning

 — 

The unit should be cleaned only as recommended by the manufacturer. 

See the Maintenance section of this manual for cleaning instructions.

9. 

 Periods of Nonuse

 

 If the unit is to be left unused for an extensive period of time, 

such as longer than a month, the power cord should be unplugged from the outlet.

10. 

Object and Liquid Entry

 — 

Care should be taken so that objects do not fall      and/or 

liquids do not spill into any openings or vents located on the product.

11. 

Damage Requiring Service

 

 The appliance should be serviced by qualified service 

personnel when:

 A. the power-supply cord or plug has been damaged.
 B. objects have fallen and/or liquid has been spilled into openings or vents.
 C. the unit has been exposed to rain.
 D. the unit has been dropped or the enclosure damaged.
 E. the unit exhibits a marked change in performance or does not operate normally.
12. 

Servicing

 

 The user should not attempt to service the unit beyond those methods 

described in the operating instructions. Any servicing not covered in the instructions 
should be left to qualified service personnel.  Please also see the Warranty Information 
for more information on product servicing.

 

For questions or comments regarding this or other products, please 
call our toll-free number: 1-800-888-4491.

Timex Audio Products, a division of SDI Technologies Inc. (hereafter referred to as 
SDI Technologies), warrants this product to be free from defects in workmanship 
and materials, under normal use and conditions, for a period of 90 days from the 
date of original purchase.

Should this product fail to function in a satisfactory manner, it is best to first return it 
to the store where it was originally purchased. Should this fail to resolve the matter 
and service still be required by reason of any defect or malfunction during the 
warranty period, SDI Technologies will repair or, at its discretion, replace this 
product without charge (except for a $3.00 charge for handling, packing, return 
UPS/postage, and insurance). This decision is subject to verification of the defect 
or malfunction upon delivery of this product to the Factory Service Center listed 
below. The product must include proof of purchase, including date of purchase. 
The fee for service after the warranty period or without proof of purchase is $6.00.

Before returning this product for service, please first replace the batteries (if 
applicable) with fresh ones, as exhausted or defective batteries are the most 
common cause of problems encountered.
If service is still required:
1. Remove batteries (if applicable) and pack the unit in a well-padded,heavy 

corrugated box.

2. Enclose a photocopy of your sales receipt, credit card statement, or other proof 

of the date of purchase.

3. Enclose a check or money order payable to the order of Soundesign, for the 

sum of $3.00 (or $6.00 if after the warranty period or without proof of purchase).

4. Send the unit prepaid to the Factory Service Center listed below:

Consumer Repair Department

SDI Technologies Inc.

Timex Audio Products Division

1401 Pullman Drive, Suite A

El Paso, TX 79936-7726

NOTE: This warranty is valid only if the product is used for the purpose for which 
it was designed. It does not cover (i) products which have been damaged by 
negligence, misuse or accident, or which have been modified or repaired by 
unauthorized persons; (ii) cracked or broken cabinets, or units damaged by 
excessive heat; (iii) damage to CD’s or tape cassettes (if applicable); (iv) the 
cost of shipping this product to the Factory Service Center and its return to the 
owner.
This warranty is valid only in the United States of America and does not extend 
to owners of the product subsequent to the original purchaser. Any applicable 
implied warranties are also limited to 90 days, and SDI Technologies will not be 
liable for consequential damages. (Some states do not allow limitations on 
implied warranties or exclusion of consequential damages, so these restrictions 
may not apply to you.) This warranty gives you specific legal rights, and you may 
also have other rights which vary from state to state.

For questions or comments regarding this or other products, please call 
our toll-free number: 1-800-888-4491.
TIMEX is a registered trademark of Timex Corporation in the United 
States and other countries.

T116-102207-0 

Printed in China

Limited 90-Day Warranty Information

Model T116

Jelly Clock

Para instruccionese en Espanol, llame al 1-800-888-4491.

For questions or comments regarding this or other products, 
please call our toll-free number 1-800-888-4491.

For additional information, online registration, 
and exclusive special offers visit our website:

T116 IB P1

Color:  Black, material:  210gsm2, Nov 2, 2007

size: 420mm x 165mm  

T116 IB P2

Color:  Black, material:  210gsm2, Nov. 2, 2007

size: 420mm x 165mm  

Summary of Contents for Jelly Clock T116









Reviews: