Timex IRONMAN Classic 50 Move+, Instruction Manual

Page: 7 / 460

TIMEX
®
IRONMAN
®
Classic 50 Move+ Owner’s Manual Page 6
ON THE WATCH
Your watch can be setup using two methods:

TIMEX Connected app (the easiest method) or

The setup functions directly in the watch
SETTING THE TIME/DATE
Setting the time manually on the watch will clear all appointments previously loaded to the watch.
1. From the Time of Day screen, press and hold the Set/Recall button.
2. Push the Start/Split button to select first or second time zone.
3. Push the Mode button, use the Start/Split and/or Stop/Reset buttons to adjust the hour digits
(remembering to pay attention to the AM/PM designation).
4. Push the Mode button, use the Start/Split and/or Stop/Reset buttons to adjust the minute
digits.
5. Push the Mode button, use the Start/Split and/or Stop/Reset buttons to reset the second digits
to 00.
6. Push the Mode button, use the Start/Split and/or Stop/Reset buttons to adjust the month.
7. Push the Mode button, use the Start/Split and/or Stop/Reset buttons to adjust the day.
8. Push the Mode button, use the Start/Split and/or Stop/Reset buttons to adjust the year.
9. Push the Mode button, use the Start/Split button to select 12-hour format or 24-hour format.
10. Push the Mode button, use the Start/Split button to select MM-DD or DD-MM date format.
11. Push the Set/Recall button if Done to confirm and exit or Push the Start/Split button to change
to Time 2 settings and repeat steps 3 through 11.
NOTES:

Don’t forget, you need to re-sync the watch to the TIMEX Connected app to re-load your
appointments.

When in Time of Day screen, press and hold the Start/Split button to ‘peek’ at the second time
zone.