Timewave DSP-D300, Manual

Page: 63 / 112

1. Insert the DSP-D300 setup CD. The setup screen should automatically appear.
If it does not, your system probably has Auto-Insert notification disabled, and
you need to run SETUP from the CD. This may be done by typing “D:\Setup”
(where D is the CD drive letter) from the Start
→ Run menu. If you have an
old version of the Windows Installer, it will be automatically updated at this
point.
Figure 30: Setup Start Screen
2.
Click “Next”.
Figure 32: Setup Chose Folder Screen
63