Timewave DSP-D300, Manual

Page: 56 / 112

LogCompareTW Diagnostic Program
The LogCompareTW program is for comparing the various logs that may be generated
via the IFLOWS system. This program is not automatically installed with the D300
software. It may be found in the Tools folder on the distribution CD.
Figure 26: DSP-D300 LogCompareTW Screen
Procedure:
•
Select the center tone file and click on “Import Tones”. It is necessary to do this
first so that the log import will have a tone cross-reference. This is the
“CONFIGURATION.txt” file.
•
Select the log file for each side and click on the matching “Import”. For a large
log file this may take a few minutes. The log type will be automatically detected.
Type Description
DataChron
This is an exported file from the DataChron table in
the swatch (that's stormwatch, not a cheap watch from
Switzerland). This should be comma delimited with
column headers.
CommRead This is an old-style CommRead log.