Timewave DSP-D300, Manual

Page: 45 / 112

illuminated or flashing, if the Overload (High) indicator is flashing, or if the Low
indicator is continuously illuminated.
Ethernet Settings
From the
Tools
menu, pick
Ethernet Settings
. The Control300 program will scan the
Ethernet settings from the Ethernet module. This may take 10-20 seconds.
Figure 10: DSP-D300 Control300 Ethernet Settings
Adjust the settings to match those required. Up to 10 telnet clients may be added. More
than 10 telnet clients may derogate operation.
See also the
set
command on page 18.
After changing the settings, the Ethernet module needs to be reset. See
Tools Menu
on
page 26 .
Options
From the
View
menu, pick
Options
.
45