Fingerprint Access Control Terminal
·
User Manual
Upgrading Device
The system can read the upgrading file from the plugged USB disk. Press OK to upgrade the device.
After upgrading is completed, the device will reboot automatically.
Notes:
The upgrading file should be put in the root directory.
The upgrading file name should be digicap.dav.
4.3.3
Setting Time
Purpose:
You are able to set the device time and the DST.
Steps:
1.
Move the cursor to Time in the main interface and press the OK key to enter the Time
interface.
2.
Edit the parameters.
Date: The displayed date on the device.
Time: The displayed time on the device.
DST:
Select to enable or disable the DST. When the DST is enabled, you can
set the DST bias time, the start time and the end time.
DST Bias: you can select 30min, 60min, 90min and 120min.
Start: Set the start time of the DST.
End: Set the end time of the DST.
3.
Press the ESC key and select Yes to save the settings and exit the interface.
Note:
The available configuration duration is from 2000.01.01 to 2037.12.31.
4.4
User Management
Purpose:
You are able to add, edit, delete and search the user.