Timewatch ULTraFace 331 Page 44 User Manual Download

Page: 44 / 65

Note

If the device is added to multiple client softwares and when the device is calling the client

software, only the first client software added the device will pop up the call receiving window.

6.14.2 Call Center from Device

Steps

1. Get the client software from the supplied disk or the official website, and install the software

according to the prompts.

2. Run the client software and the control panel of the software pops up.

3. Click Device Management to enter the Device Management interface.

4. Add the master station and the device to the client software.

Note

For details about adding device, see Add Device.

5. Set the master station's IP address and SIP address in the remote configuration page.

Note

For details about the operation, see the user manual of the master station.

6. Call the center.

If you have configured to call center in the Basic Settings , you can tap

to call the center.

If you have not configured to call center in the Basic Settings , you should tap → to call

the center

7. Answers the call via the master station and starts two-way audio.

Note

The device will call the master station in priority.

6.14.3 Call Device from Client Software

Steps

1. Get the client software from the supplied disk or the official website, and install the software

according to the prompts.

2. Run the client software and the control panel of the software pops up.

3. Click Device Management to enter the Device Management page.

4. Add the device to the client software.

Note

For details about adding device, see Add Device.

ULtraFace 331 Face Recognition Terminal User Manual

Page 44 of 68

Summary of Contents for ULTraFace 331


































































Search results

Summary of Contents for ULTraFace 331

Reviews:

Related manuals for ULTraFace 331

Brands by name

Popular brands

Timewatch ULTraFace 331, User Manual

Search results

Summary of Contents for ULTraFace 331

Reviews:

Related manuals for ULTraFace 331

Brands by name

Popular brands