Result
On the initial page and authenticate. If you do not select a status, the authentication will be
marked as the configured attendance status according to the schedule. If you tap Select Status and
select a status to take attendance, the authentication will be marked as the selected attendance
status.
Example
If set the Break Out Schedule as Monday 11:00, and Break In Schedule as Monday 12:00, the valid
user's authentication from Monday 11:00 to 12:00 will be marked as break.
6.13 System Maintenance
You can view the system information and the capacity. You can also upgrade the device, restore to
factory settings, and restore to default settings.
Long tap on the initial page for 3 s and slide to the left/right by following the gesture and login the
home page. Tap Maint..
Figure 6-17 Maintenance Page
System Information
You can view the device model, serial No., versions, address, production data, QR code, and
open source code license.
Note
The page may vary according to different device models. Refers to the actual page for details.
Capacity
You can view the number of, user, face picture, card, event and fingerprint.
35
ULtraFace 331 Face Recognition Terminal User Manual
Page 42 of 68
