Parameter
Description
Door Contact
You can select "Open (Remain Open)" or "Close (Remian
Closed)" according to your actual needs. By default, it is Close
(Remian Closed).
Open Duration
Set the door unlocking duration. If the door is not opened for
the set time, the door will be locked. Available door locked time
range: 1 to 255s.
6.12 Time and Attendance Status Settings
Set time and attendance status. You can set the attendance mode as check in, check out, break
out, break in, overtime in, and overtime out according to your actual situation.
Note
The function should be used cooperatively with time and attendance function on the client
software.
6.12.1 Disable Attendance Mode via Device
Disable the attendance mode and the system will not display the attendance status on the initial
page.
Tap T&A Status to enter the T&A Status page.
Figure 6-13 Disable Attendance Mode
Set the Attendance Mode as Disable.
You will not view or configure the attendance status on the initial page. And the system will follow
the attendance rule that configured on the platform.
6.12.2 Set Manual Attendance via Device
Set the attendance mode as manual, and you can select a status manually when you take
attendance.
Before You Start
Add at least one user, and set the user's authentication mode. For details, see User Management.
31
ULtraFace 331 Face Recognition Terminal User Manual
Page 38 of 68
