2020v1 General Timing Solution manual
5
HOWEVER
:
You stay always in control of the scoreboard, by means of the “Scoreboard Remote Control” box,
that you also plug into the GTS box. In other words; the scoreboard will receive the signals from
the photocells, but ALSO from the “Scoreboard Remote Control” box. You will see that the
scoreboard will:
•
Start if you press the “Start” button, or interrupt the “Start” photocell barrier.
•
Stop if you press the “Stop” button, or interrupt the “Stop” photocell barrier.
•
Record a SPLIT time or will Reset if you press the “Lap/Reset” button, or interrupt the
(optional) “Lap/Reset” photocell.
1.2
2 types of configurations
There are 2 types of configurations for the General Timing Solution:
•
TTC810 = using 2 sets of “reflector type” of photocells, optical range = 2,5 meter
•
TTC811 = using 2 sets of “Trans Receiver type” of photocells, optical range = 15
meter
The main difference is the longer range of the photocells, but for this purpose these photocells
need an extra battery for each photocell transmitter. The timing operation of the 2 configurations
is the same.
1.2.1
TTC-810 (scoreboard not included)
•
1x Battery pack: to be plugged into the GTS box, to power the photocells.
•
1x Battery charger
•
2x tripod for the photocells
•
2x L-piece for the photocells
•
1x GTS box: cable of the box is 9m
•
2x reflective photocell optical range max 2,5m): cable of the photocells is 20m
•
optional
:
o
intermediate or reset:
▪
1x reflective photocell with reflectors (optical range max 2,5m): cable of
the photocells is 20m
▪
1x tripod for the photocells
▪
1x L-piece for the photocells
o
extra reels to extend the cable of the photocells (max. 500m)
