w w w . e p i c a m e r a . c o m
Quick Start Guide
©
2018
Timetec Cloud Sdn Bhd. All rights reserved • 042018
Epicam E16S
Smart Camera
PRODUCT APPEARANCE
Please refer to the following pictures for
more details regarding each port.
Device ×1
Quick Start Guide ×1
Screw Packet ×1
Power Adapter ×1
Installation Position Map x 1
1
2
3
4
5
QUICK START GUIDE
2
3
4
5
Please refer to the following table for more details about indicator light status.
DEVICE STATUS
Booting
Booting completed, awaiting WiFi
config, enter smart config status;
WiFi smart config in progress,
including WPS (WiFi Protected
Setup), management frame, etc.
WiFi connection succeeded,
operating normally.
Device upgrade
Network disconnected
Device fail to boot up; alarm or SD
card does not work
INDICATOR LIGHT STATUS
Red light stably on
Green light slow flashing
Green light quick flashing
Green light stably on
Red and green lights flash alternately
Red light slow flashing
Red light quick flashing
NOTE:
To reset, long press for 8 seconds until light off; For WPS (WiFi Protected Setup), a quick press will suffice.
CAMERA & ACCESSORIES
1
PIR (Sense IR
ray, trigger
alarm
)
Indicator light
Microphone
IR LED
Micro SD
card slot
........
Ethernet port
(Wireless connection
mode is available as well)
Speaker
Reset/WPS
button
(WiFi Protected
Setup)
Power port
Digital
input/output
(Refer connection
mode)
