Installation Guide
©
2019 Timetec Cloud Sdn Bhd. All rights reserved • 012019
w w w . i - t i m e t e c . c o m
TimeTec BLE-2
Barrier Gate/Turnstile
RECOMMENDATIONS:
BARRIER GATE
•
Install TimeTec BLE-2 inside a PVC/plastic enclosure and on a
gooseneck pole.
•
Protect wires from TimeTec BLE-2 to the barrier gate via concealed
piping.
•
A single TimeTec BLE-2 can control a maximum of two barrier gates
simultaneously but only when the gates are operating in the same
direction. If there are two barrier gates that are facing different
directions, you will need to utilize two TimeTec BLE-2 instead.
STEP • 1
Determine
where you
want to install
TimeTec
BLE-2
TURNSTILE
•
A single TimeTec BLE-2 can control one turnstile at a time even if the turnstile operates
in two different directions.
•
Install TimeTec BLE-2 inside a turnstile housing together with the turnstile controller in
order to minimise the need for extra wiring.
•
Place the correct QR code at the turnstile to indicate the movement directions (in or
out). A single TimeTec BLE-2 can control both in and out direction, thus there will be 2
different QR codes stickers to be placed on both directions.
•
If a second TimeTec BLE-2 is installed to control the in or out movement, please place
the respective QR code (in/out) to each turnstile.
X-meter
2-meter
