Timespace X300 Mark 2 Instruction Manual Download Page 41

Page: 41 / 185

X300 Instruction Manual

Chapter 3 - User Guide – X300 Menu System

3.1.4.2

SD Card Recorded Files

The SD CARD RECORDED FILES menu lists the files recorded on the SD card.

The files cannot be played back on the X300, and must be viewed through

PCLink

. Navigation of the

file list pages are via the left/right arrow menu keys on the

Reviewer

when PAGE or FIRST/LAST page

is highlighted.

HINT

: Files can be write-protected by scrolling down to the file and pressing the left arrow key on

the

Reviewer

, a W should appear next to the file. Pressing left again will remove the write-

protect.

Summary of Contents for X300 Mark 2


























































































































































































Search results

Summary of Contents for X300 Mark 2

Reviews:

Related manuals for X300 Mark 2

Brands by name

Popular brands

Timespace X300 Mark 2, Instruction Manual

Search results

Summary of Contents for X300 Mark 2

Reviews:

Related manuals for X300 Mark 2

Brands by name

Popular brands