Timespace X300 Mark 2, Instruction Manual, Page: 120 / 185

X300 Instruction Manual Chapter 3 - User Guide – X300 Menu System
109
3.4.3 Load Software/Settings
LOAD SOFTWARE/SETTINGS menu provides options for loading new/upgraded software and/or
settings. An .XOS file should be copied onto the cartridge or SD card using a PC then inserted into the
X300. Settings can also be copied from another X300 unit.
LOAD FROM – select HD (to load from the hard disk drive) or SD (to load from the SD card).
LOAD SYSTEM SOFTWARE – select from the options to load software either:
WITH FACTORY SETTING (load the XOS software with Timespace factory default settings).
WITH CURRENT SETTINGS (load the XOS software but retain settings as installed in the
currently configured DVR).
WITH XOS SETTINGS (load the XOS software with settings from the HD cartridge or an SD
card).
LOAD MENU SETTINGS – used to copy menu settings from another DVR unit and replicate these on
the second DVR.
LOAD CONFIG DATA – load eg settings for a new IP Camera via a TSCONFIG file. See IP Camera
GROUP SETTINGS menu for more information.
WARNING : Caution should be taken to ensure that power is not lost during an upgrade.