ECC NO. 532
Page 1
73633 REV. A
Installation Guide
Micro Lynx VSG Option Card
1755 LA COSTA MEADOWS DRIVE, SUITE B
SAN MARCOS, CA 92069
TEL. 760-761-4440
(FAX 760-761-4449)
DATE:
09/11/95
MODEL:
Micro Lynx
REVISION:
All
SERIAL NO:
All
SOFTWARE:
All
REQUIRED TOOLS:
Static safe workstation
Phillips screwdriver
Grounding wrist strap
REQUIRED PARTS:
TimeLine Part Number 71B010, Video Sync Generator (VSG) Option Card
PROCEDURE:
1. Turn off the power and place the Micro Lynx System Unit on a static safe
workstation. Ground yourself and the workstation anti-static mat.
2. Remove the six phillips screws securing the top cover of the System Unit.
3. Position the System Unit so that the front panel faces you, and remove the cover.
4. Locate connector J1, the Video Sync Generator 20-pin plug, in the right front corner of
the main board.
5. Hold the VSG card component side up and position socket J1 so that it can be placed
into the J1 plug on the main board. Align the two standoffs on the main board with
the holes in the VSG card.
