timecode systems SyncBac PRO, User Manual

Page: 12 / 64

Charging your SyncBac PRO
SyncBac PRO has a built-in Li-Polymer 3.7V battery and it should last around 10-12
hours from a full charge.
Note: Battery life may be reduced if your SyncBac PRO is used in extreme
temperatures. Both very hot and very cold conditions can affect battery
performance.
If the battery in your SyncBac PRO is running out of power, the LED flashes red and
the following message is displayed on screen:
The low battery power is also indicated on the battery icon in the bottom-right of
the main screen, next to the channel number. The amount of white in the inner of
the battery icon represents the amount of charge left in the battery. In the image
below, the inner of the battery icon is black, which means there is no charge in the
battery.
It is also shown on the battery status screen (see Status Information on page 39 ).
To recharge the battery, you will need the mini USB cable that is supplied with your
SyncBac PRO and a mini USB compatible charger socket (not supplied). The mini USB
cable connects to the SyncBac PRO via the mini USB port on the left-hand edge (see
Ports on page 11 ).
Note: You do not have to disconnect your SyncBac PRO from the HERO4™
when charging.
12 SyncBac PRO User Guide