6.To remove the winding stem
1) Set the winding stem to normal position.
2) Pull out the winding stem while pushing "A".
Push "A"
7.To remove or install the battery
1) Remove the hook of the switch spring's battery clamp.
2) Insert the battery sideways, and have the hook of the switch spring's battery clamp catch the main plate.
Switch spring
Battery clamp
1) When Removing
Main plate
2) When Installing
8.Remarks on installing the battery
1) After the battery is replaced with a new one, or after the
battery is reinstalled following the repairing procedures,
Tweezers
be sure to touch the AC terminal of circuit block and
the switch spring with conductive tweezers to reset
the circuit as illustrated.
SII Products
13
24
Version-02
TECHNICAL GUIDE
VK73
