Timberwolf TW 280FTR (Petrol), Instruction Manual

Page: 35 / 68

C190-0308 - Rev 1.0 EN 33/66
4.18 Check Fuel Level and Refuel
Always follow standard Health and Safety procedures.
The fuel level is visible through the side of the tank. To replenish, follow this process:
• Stop the engine and allow it to cool before refuelling.
• Never smoke or allow naked flames nearby while refuelling.
• Store fuel away from vapour ignition sources such as fires or
people smoking.
• Never refuel at the operating location, move to a distance > 10 m to avoid creating fire
hazards.
• Fuel storage containers must not be transported in the feed funnel.
• Fuel storage containers must be approved for appropriate fuel storage and clearly
labelled, with securely fitting caps.
• Clean the area around the fuel cap and use a funnel for refuelling. Replace the fuel
cap securely.
• Avoid skin contact with fuel. If fuel enters the eyes, wash out with sterile water
immediately and seek medical advice as soon as possible.
• Always clean up spillages quickly. If fuel is spilt on clothing, change clothes before
returning to the work area.
4.19 Winch Operation
Where a winch is factory fitted to your TW 280FTR, it is intended to be used for recovery
purposes only.
Always follow the winch manufacturer's instruction manual, provided with your machine.
4 Operating Instructions TW 280FTR (Petrol)