W415-0865 / 04.07.10
35
THE FRONT OF THE HEATER BECOMES VERY HOT DURING OPERATION. LET THE HEATER COOL
COMPLETELY BEFORE CONDUCTING SERVICE.
!
WARNING
11.0 MAINTENANCE
11.1 DAILY (WHENEVER USING THE APPLIANCE)
11.1.1
DISPOSAL OF ASHES
11.1.2
INSPECT THE BURN POT
40.2
Ashes should be placed in a metal container with a tight
fi
tting lid. The container should be placed on a non-
combustible
fl
oor, well away from combustible materials, pending
fi
nal disposal. If ashes are disposed of by burial
in soil or otherwise locally dispersed, they should be retained in the closed container until all cinders are thoroughly
cooled.
When burning, the
fl
ames should be bright orange with embers jumping from the
burn pot. If not see “MAKE SURE PELLETS ARE NOT PILING UP” or “CLEANING
THE BURNPOT” sections.
40.3A
11.1.3
CARE OF GLASS
If the glass is not kept clean permanent discolouration and / or
blemishes may result. Normal operation of your pellet heater will
produce a build-up on the glass that should be wiped off daily.
However, poor quality pellets or extended burning on the low
setting will cause the glass to “smoke up” faster.
Refer to “REPLACEMENT PARTS” section to
fi
nd out what this
product is equipped with. Use only replacement glass available
from your Authorized dealer.
DO NOT CLEAN GLASS WHEN HOT!
If necessary, clean the glass with a soft cloth or paper towel. You could use “wood stove” glass cleaner to
remove heavy build-up.
Do not operate the heater with broken glass, as leakage of
fl
ue gases may result.
5.2
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
!
WARNING
