22
Before a long break in use of the conditioner:
• Turn the conditioner on for several hours in the FAN mode. It will dry its inner cavities
• Unplug the conditioner.
• Remove the batteries from the remote control.
Checks before starting:
• Make sure that an air filter is installed.
• Make sure that air inlet and outlet grilles of the outdoor unit are not blocked by foreign objects.
Cleaning of air filter:
• Air filter cleans the air entering the conditioner from dust and foreign particles. If the filter is
contaminated, the conditioner capacity decreases sharply.
• If the conditioner is operated permanently, the filter should be cleaned once per two weeks.
• If the conditioner is installed in a room with dusty atmosphere, then the air filter should be
cleaned more often.
• To remove the filter, open the indoor unit panel.
• Remove air filters. Clean the filter with a vacuum cleaner. If the filter is contaminated heavily,
clean it with a soft brush and wash in diluted washing solution, then dry it in a cool place.
• While cleaning the filter with the vacuum cleaner, hold it with contaminated surface up. While
washing the filter in water, hold it with contaminated surface down.
• Do not dry the filter in the sun or near fire.
• Set the air filter to initial position and close the panel.
12. WIRING DIAGRAMS
T-AC07-S25-Y, T-AC09-S25-Y, T-AC12-S25-Y, T-AC18-S25-Y, T-AC24-S25-Y
