www.timberk.com • Electric air conditioner
10
9. TROUBLESHOOTING
Trouble
Cause
Troubleshooting method
The air conditioner is not switched on
when Power button is pressed
The tank fill-up
indicator is flashing, the
condensate collection
tray is filled up
Drain water from the tray
Actual room temperature
is higher than the set one
(in heating mode)
Set the temperature correctly
The air conditioner switches in heating
mode
Automatic overheating
protection is tripped.
The unit is switched off
in case the outlet air
temperature goes higher
than 70°C
Wait until the air conditioner cools
down and switch it on again
Loud noise or strong vibration
The air conditioner is
installed on an inclined or
unsmooth surface
Install the air conditioner on a
smooth horizontal surface
A noise, resembling a gurgle of water
Noise emerges due to
refrigerant flow in pipes
It is normal
Trouble
Cause
Troubleshooting method
E1
Short circuit on a
temperature sensor or a
processor board
Contact an authorized service
center
E2
Short circuit between
a copper pipe of the
temperature sensor and
the processor board
wiring
Contact an authorized service
center
E4
It indicates the tank is
filled up with water or
the plug is connected
incorrectly
Remove the rubber plug, located
at the bottom of the unit, and
drain water. Then check it the
plug is connected correctly.
Error codes for LCD-display models
11. SERVICE LIFE
12. UTILIZATION RULES
Service life of the appliance is 10 years provided that the respective
installation and operation rules are observed.
Date of the conditioner manufacture is shown in a serial number of the
device. For more details, please, ask a shop assistant.
Upon expiration of the service life, the appliance should be utilized in
accordance with norms, regulations and procedures effective in the
place of utilization.
10. TRANSPORTATIOM AND STORAGE
Temperature
requirements*
Humidity
requirements*
We are exploring new technologies and we constantly improving the quality
of our products. That’s why specifications, design and accessories are
subject to change without any specific notice.
* This product must have storage in dry, well-ventilated space of warehouse
at the temperature not lower than -30°.
Transportation and
storage
From -30° to +50°
From 15% to 85%
(without a condensate)
