ROLLER EXPRESS
WAND MOTORIZATION INSTALLATION INSTRUCTIONS
TOOLS
GETTING STARTED – TOOLS NEEDED FOR INSTALLATION
UNPACKING
THE PARTS
Locate labeled hardware bag
(items may vary depending on requested shade).
ITEM
1
2
3
4
(If Applicable)
5
(If Applicable)
6
(If Applicable)
ITEM
NAME
Installation
Bracket
Installation
Screws
Wand
(A)
Fascia
OR
(B)
Contoured
Valance
(A)
Outside Mount
Extension
OR/AND
(B)
Inside Mount
Fascia Bracket
(A) Fascia Standard Returns
(B) Valance Returns
BRACKET
PLACEMENT
METAL FASCIA
PLACEMENT
VALANCE
PLACEMENT
INSIDE
MOUNT
OUTSIDE
MOUNT
OR
Locate Items 1 & 2 for this section
Determine bracket placement
(Inside Mount
OR
Outside Mount).
Using the Drill, secure your
brackets with installation screws.
Locate Item 4(A) for this section
To insert item 4(A) into Inside Mount Fascia
Bracket make sure to first position/rest the
Fascia according to the image (step 1) and
then give a slight tap to the fascia with
enough force until you hear an audible
“click”(step 2).
Locate Item 4(B) for this section
To insert item 8(B) into Inside Mount Fascia
Bracket, make sure to position the valance
where the channel is at the top of the
valance (as shown in the image). Then push
in the Inside Mount Fascia Bracket and turn it
on a 90⁰ angle until is secured.
SKIP THIS STEP IF
NOT INSTALLING
A VALANCE
Step
2
Step
1
Locate Item(s) 5 for this section
Item 5(A) will only be included if installing as
an outside mount.
Place and secure item(s) 5A and/or 5(B) at an
equal in-between distance between the
Installation Brackets.
Locate Item(s) 5 for this section
Item 5(A) will only be included if installing as
an outside mount.
Place and secure item(s) 5A and/or 5(B) at an
equal in-between distance between the
Installation Brackets (item 1).
INSIDE
MOUNT
Step
1
Step
2
OUTSIDE
MOUNT
For flush mount, be sure
to leave a front gap the
thickness of the valance.
INSIDE
MOUNT
Step
1
Step
2
OUTSIDE
MOUNT
For flush mount, be sure
to leave a front gap the
thickness of the fascia.
Step
1
Step
2
SKIP THIS STEP IF
NOT INSTALLING
A FASCIA
Locate Item 6 (A) for this section
To insert item 6 (A) into Fascia, position the standard
return as shown in the image, and insert the return until
fully secured.
Locate Item 6 (B) for this section
To insert item 6 (B) into Valance, positon the valance as
shown in the image, and insert the return until fully
secured.
SKIP THIS STEP IF NOT INSTALLING RETURNS.
SKIP THIS STEP IF NOT INSTALLING RETURNS.
INSIDE
MOUNT
OUTSIDE
MOUNT
OR
Bracket for one side
Bracket for opposing side
