5 Data signals from the MIRUS Controller
ARKON Data Bridge SW 1.00.n, Instructions for Use (en-GB)
19
5 Data signals from the MIRUS Controller
The following tables list the MIRUS Controller output signals provided by the ARKON Data Bridge
that are visible on the patient monitor. The signal ranges and validity conform to the specifications
of the MIRUS Controller.
5.1
Measurements
Measurements
Description
Unit
etDES
End-tidal concentration of the
volatile anaesthetic
% v/v
etISO
etSEVO
etCO
2
End-tidal concentration of CO
2
mmHg
5.2
Settings on the MIRUS Controller
Value
Description
Unit
MAC
MAC target value
No unit
5.3
MIRUS Controller alarms
Certain high-priority alarms are transferred. The alarm notifications are displayed on the patient
monitor in English.
Delay:
There is a delay of up to 15 seconds before the alarms sent from the MIRUS Controller are
displayed on the screen of the patient monitor.