28
8.8. Information on the operation of the stove
Information on the operation of the stove are useful because at any moment you can trace in what
mode is the stove is operating, the temperature of exhaust gases, the fan speed, time remaining
until the next action, etc.
To enter the menu, which monitors the stove modes you need to do next. Press the 3 (set), after
which it will be displayed
menu 01 messages ADJUST blowers.
Then press the button for 5 seven times, after you’ll be shown the message
menu 08
STATE STOVE.
Pressing 3 (set), you access the menu for print the messages about the stove status. Messages
will be alternately changed. Order of printing and layout of thedisplay is shown in the figure below.
To exit this menu presses the key 4.
8.9
Technical settings
IMPORTANT !!!
This menu is reserved only for professionals trained to adjust the stove, and for
the service. Any change in the parameters that was made by unauthorized persons
will mean the loss of warranty !!!
x 6
Summary of Contents for rittium 14 hydro
