INTRODUCTION
Introduction - 7
Using Your Manual
Throughout this manual, you will encounter special messages and symbols that identify potential safety
concerns to help you as well as others avoid personal injury or damage to the equipment.
Symbol Definitions
Attention
This symbol identifies potential health and safety
hazards. It marks safety precautions. Your safety
and the safety of others is involved.
There are three signal words that describe the level of safety concern: Danger, Warning, and Caution.
Safety should always be the #1 priority when working on or operating equipment. Accidents are more likely
to occur when proper operating procedures are not followed or inexperienced operators are involved.
Note: Right-Hand and Left-Hand orientations may be referred to at different places throughout this manual.
Right-Hand and Left-Hand is determined as if facing forward from the operator station.
Signal Word Definitions
CAUTION
Indicates a potentially hazardous situation which
if not avoided, may result in minor or moderate
injury and/ or property damage. It may also be
used to alert against unsafe practices.
DANGER
Indicates an imminently hazardous situation
which, if not avoided, will result in death or seri-
ous injury. This signal word is limited to the most
extreme cases.
WARNING
Indicates a potentially hazardous situation which,
if not avoided, could result in death or serious
injury.
