ASSEMBLY SCHEMA
Eos YW/YM
Contents
(Wooden/Metal Leg)
a)
b)
c)
1 pc. Shell
1 set. Chair Leg
16 pcs. Screw
1
2
3
Place the seat (a) upside down on a
suitable ground, screw each leg loosely to
the part mounted below the seat.
Place the
chair as seen
in the figure.
Make sure
each foot
fits well on a
flat surface
by applying
manual
overhead
pressure to
the chair.
Tighten the screws
(c) with an allen or
cordless drill with an
allen tip.
b
c
a
Please be sure not the miss
any screw holes and fasten
all screws equally and tightly.
Otherwise, you may face
breakage or cracking during
the time of usage.
V02
03
202
1
