tilgin HG2280 series, Quick Manual

Page: 10 / 20

8
4.4.2.1 Configuring WLAN Client for computer devices
The Wireless LAN configuration is dependent on your computer/operating system. For more
detailed instructions refer to your computer operating systems Help.
If you have received instructions from your operator regarding WLAN security level settings,
you should follow these instructions when running the WLAN configuration.
If the configuration fail, and/or your operator do not recommend specific WLAN settings, use
the default WLAN port settings below.
Default WLAN port settings
Check that the parameters for WLAN are set according to SSID and WPA key found on the
casing label on the back of the home gateway.
SSID = Tilgin -<12 random characters>
Example: Tilgin-1wa23sbg9skm
Channel = Auto
Note: Your operator may instruct you to use a WPA key that they provide to you, or use the
WPA key printed on the label on the backside of the home gateway.
Make sure your WLAN profile is saved, and make sure your computer network settings are
configured properly.
4.5 Configuring your computer/device
Your computer must be configured properly to be able to connect to the Internet and the
computers network card and network properties must be configured to obtain an IP address
from the home gateway
’s built-in DHCP server.
This means that you must check that your computer network settings are set to TCP/IP
protocol and that the IP address will be obtained automatically.
For detailed instructions how to set up your home network check instructions/Help for your
operating system on your computer.