TIGIEFFE AIRO R Series, Use And Maintenance Manual

Page: 41 / 114

Use and Maintenance Manual - R13 R17 Series Page 41
5.1.3. Other functions of the platform control panel
5.1.3.1. Electric / thermic power selector (F) (OPTIONAL)
The propulsion type can be selected using the selector F .
Setting the selector forward (sparking plug symbol) the thermic propulsion is selected (Petrol or Diesel motor); setting the selector
backward (electric motor symbol) the electric propulsion is selected (230V single-phase pump or 380V three-phase pump).
5.1.3.2. Electric motor start / stop button (E) (OPTIONAL)
Once the electric power has been selected by means of selector F , if the ground control panel is connected to the mains, press
button E to turn on the pump (if off) or to turn it off (if on), to press the electric pump press button E .
See next paragraphs for operations modes of the starting button of the electric pump.
5.1.3.3. Enabled electric pump warning light (T) (OPTIONAL)
When green warning light T is on, the electric pump is enabled, if selector F is in “Electric” position and ground control connected to
the mains.
5.1.3.4. Heat motor starting switch (G)
After selecting the thermic power by means of selector F , use switch G to start/stop the heat motor (Petrol or Diesel):
 In START position it enables starting.
 In position 3 sec it pre-heats the plugs (Diesel motors with plugs only);
 In position 0 it stops the heat motor.
5.1.3.5. Horn (B)
It warns that the machine is moving. It is operated by means of button B .
5.1.3.6. Emergency STOP button (P)
By pressing button P all machine control functions are stopped. Normal functions are enabled by rotating the button of 1/4 turn
clockwise.