18
18G 4x2 HDMI Matrix Switcher
Control
⚫
RS232
1) ASCII or HEX command format can be selected.
2) Baud Rate: Supports 2400, 4800, 9600, 19200, 38400, 57600 or 115200.
3) Command Ending: NULL, CR, LF or CR+LF can be chosen.
4) User-defined Command: Type the command in this box to control the third-
party device which is connected to the RS232 port of the switcher.
⚫
Unsolicited Status
The Unsolicited Status feature allows for automatically sending the full status
report (see command getstatus in the
8.3 Command Protocol
section) to a user
defined IP-Address, UDP Port and interval.
1) Function switch: ON/OFF
2) Send Status Port: User-defined UDP port
3) Send Status IP Address: Send to the specified IP address
4) Status Interval (1-3600 sec): Sending interval
