HDMI 2.0 1x4 Distribution Amplifier
5
3. Panel Description
3.1 Front Panel
①
Power LED:
The LED illuminates red when power is applied.
②
INPUT LED:
The LED illuminates blue when there is an input signal present.
③
OUT 1~OUT 4 LED:
The LED illuminates blue when there is HDMI output on the
corresponding channel.
④
EDID:
4-pin DIP switch for EDID setting.
⑤
FW:
Micro-USB port for firmware upgrade.
3.2 Rear Panel
①
IN:
Type-A female HDMI input port to connect HDMI source.
②
OUT 1 ~ OUT 4:
Four Type-A female HDMI output port to connect HDMI displays.
③
AUDIO OUT:
5-pin terminal block for balanced audio output.
④
SPDIF OUT:
Toslink connector for optical audio output.
⑤
DC 5V:
DC barrel port to connect a power adapter.
1 2
4
5
3
L
R
1
2
3
4
5
