TIGEX 80890843, Operating Instructions Manual, Page: 58 / 66

56
This function is a safety programming which ensures
that baby unit will start automatically again after a
power outage. However, if you turn the baby unit off
manually by pressing the power ON/OFF button
18 the
unit will stay off during a power outage.
7.3 Connecting baby unit and parent unit
Once both units are supplied with electricity and are turned
on, they start connecting automatically. During the pairing
process the red of the five LED indicators
2 on the parent
unit 1 and the link indicator 17 on the baby unit 15 light up
red. When the link is established both indicators will turn
green.
Always ensure that the parent unit remains within the range
for the pairing process.
In the event that the connection between the parent unit
and the baby unit breaks down, the devices will
automatically attempt to establish a new one. If a new
connection is not established within 30 seconds, the parent
unit
1 will emit a regular beep and the link indicator 7 will
light up red. You may need to move the parent unit to a
different location before a new connection can be
established.
8. Alerts, warnings and indicators
This baby monitor has several ways to warn or alert you.
If you hear an alert pay close attention to the parent unit
and its display. Usually a sound indication is combined with
a special icon shown on the display. Note: blinking Icons and red LEDs need your attention and
reaction immediately.
Above the display 3 on the parent unit 1 are 5 LEDs 2 (4
green, 1 red). These LEDs have multiple purposes.
9. Activation of features
9.1 Volume adjustment
To adjust the volume of the parent unit you can use the
volume adjustment buttons
5 . All together there are 5 levels
of volume and the option to mute the parent unit (see
"Mute Setting“ on page 57).
Sound alert Indicator/Icon Meaning What to do
Alarm every 30 s Link indicators 2 and 17 are
red
Link icon
22 is flashing
Parent unit is either out of
range or you lost the link to
the baby unit for another
reason Move the parent unit to a different
location so a new connection can be
established
Alarm every 60 s LED indicator 7 is flashing
red
Battery icon
24 is flashing
Battery is low Connect the mains adapter
Nursery temperature shows
LO, HI or is flashing
The temperature is outside
the correct range Action is required (see
"9.7 Temperature tracking" on
page 58)
Activated function Meaning
No function is activated
(frequently illuminated LEDs)
Indicating the noise level in the nursery. The more LEDs are lit, the louder are the
noises.
Adjusting volume
(steady illuminated LEDs)
The more LEDs are lit, the higher the volume level on the parent unit.
Adjusting VOX sensitivity
(flashing LEDs)
The more flashing LEDs the higher is the VOX Level and the more the microfon on
the baby unit is reacting to small noises. Level 5 will continuesly transmitt all noises
without activating the Eco-Mode
Eco-Mode / Lullabies
(no illuminated LEDs)
Indication that maybe the Eco-Mode is activated and your baby is sleeping.
The LEDs are also deactivated while the Lullabys are playing.
Only the red LED lights up Lost link/no connection between parent unit and baby unit or indication for low
battery status.